Having trouble removing an implant? We have the solution!

Explore the world of advanced dentistry with GT-Medical’s Universal Implant Extractor. This device provides an innovative solution to the challenge of removing poorly integrated or fractured dental implants without compromising the integrity of the alveolar bone. Its design offers an efficient and precise way to address these problems, ensuring a safe and risk-free extraction process for the patient. WHAT IS AN IMPLANT REMOVER? An Implant Extractor is a dental device that safely and efficiently removes problematic dental implants. This instrument applies controlled forces to loosen and remove the implant without damaging the surrounding bone. Its tapered body adapts to various implant types and clinical situations, offering a reliable solution for dental professionals. MAIN CHARACTERISTICS UNIVERSAL This product is compatible with all types of dental implants, regardless of their connection, platform, or length. MULTIFUNCTION The extractor is a single piece with conical geometry that can be adjusted to remove various damaged parts. The cut of the extractor will vary depending on the type of part that needs to be removed. LIMITED USE Designed for single use per patient, but can be reused up to two times (three uses) depending on the first use. MAXIMUM TORQUE The extractor can withstand torque of up to 200N-cm* to tighten it onto implants. *If the device fails to pull out near the maximum torque of 200N-cm -> trim the end about 0.5mm and try again. SIZES Available in two different lengths with identical extraction geometry. GENERAL EXTRACTION PROCEDURE Depending on the type of part to be removed, proceed in a particular way, but in general, proceed as follows: Check that the element is completely immobile**. Mill the surface to make a hole in the centre**. Cut the extractor to the specific size for each case. Insert the puller and turn counterclockwise, making sure it is tight. Insert the round ratchet and turn counterclockwise applying a maximum torque of 200N/cm. ** Proceed in the case of extraction of broken and/or worn screws. To read the complete and particular process for each case, please refer to the following PDF document. BUY GT-MEDICAL EXTRACTORS HERE

Having trouble removing an implant? We have the solution! Read More »

SWEDEN & MARTINA – PRAMA IMPLANTS

Discover the technical features that make Sweden & Martina’s Prama implant unique! From its cylindrical body designed for optimal insertion to its internal hexagonal connection and its neck with hyperbolic geometry, every detail is designed to ensure maximum stability and perfect integration into the bone. INNOVATIVE DESIGN Sweden and Martina’s “PRAMA” implants represent an innovation in the field of dentistry, standing out for their focus on the intramucosal implant concept: their wide transmucosal portion and a conical shape converging towards the crown, offer clear advantages compared to conventional implants. The intramucosal implant concept has been one of the most prominent innovations in implant-prosthetics over the past 20 years. This approach has focused on soft tissues, recognizing their esthetic value and their biological function, highlighting that a thick, healthy and stable gingiva can protect the underlying hard tissues. NECK PARTS The neck of PRAMA implants are formed by : Cylindrical part: it favors the adaptation to the irregularities of the bone tissue and another convergent zone towards the crown. Convergent part: it leaves more space for the soft tissues to grow around the implant. CHARACTERISTICS AND ADVANTAGES The hyperbolic shape of the Prama neck has a distinctive convergent curvature that not only makes it easily adaptable to bony unevenness and asymmetrical ridges, but also avoids the need to modify existing bone. The UTM (Ultrathin Threaded Microsurface) surface of the collar is excellent for osteoblasts, promoting their growth and stability over time, as well as preventing plaque accumulation at the abutment level. This helps to adjust the depth of the implant as needed, creating a firm base. TYPES OF BODY, PLATFORM AND HEIGHT NECK BODY TYPES Straight: “PRAMA” – with straight apex and anti-rotation groove Tapered: “PRAMA RF” – with rounded apex and anti-rotation groove Narrow: “PRAMA SLIM” – with constant diameter of 3.30 mm PLATFORM TYPE Collex One, an internal hexagonal connection that maintains uniformity between implants of different diameters. Same platform diameter (3.4 mm) for different nominal diameters (3.80, 4.25 and 5.00 mm). Both Prama RF and Prama implants share this connection and the transmucosal collar. NECK HEIGHT PRAMA implants are available in 3 different collar heights: SHORT NECK: 1,8 mm REGULAR NECK: 2,8 mm LONG NECK: 3,8 mm AVAILABLE ABUTMENTS PRAMA STANDARD: Closes over the implant platform and is suitable for all platform diameters and neck heights. PRAMA IN 0.5: fits the neck of the implant up to a height of 0.5 mm and is suitable only for neck heights of 2.80 and 3.80 m PRAMA IN 1.5: includes the neck of the implant up to a height of 1.5 mm and is suitable for neck heights of 2.80 only. GT-MEDICAL COMPATIBILITY GT-Medical offers compatibility only for the Prama Standard Prosthesis. Explore the compatible digital attachments here.

SWEDEN & MARTINA – PRAMA IMPLANTS Read More »

Scroll to Top