ANGLED ABUTMENT KIT

MATERIAL

The Angled Abutment Kit consists of the Angled Abutment and screw, both made of Titanium Grade 5 with a mirror-polished finish to prevent bacterial plaque adhesion.

JOINING

The joining between the Angled Abutment and the prosthetic structure is done by cementation, while the joining with the implant is done with the connecting screw.

GEOMETRY

The external geometry of the abutment is divided into 3 parts:

• Connection surface with the implant: rigorously machined with the original measurements of the corresponding implant and offers a machining tolerance never greater than +-0.01mm. Which allows for a perfect fit and passivity.
  
  
• Gingival surface: has a height that varies between 1.5 mm and 2.5 mm depending on the implant model. The emergence diameter varies depending on the tooth being rehabilitated.
  
  
• Tallable surface: the body of the abutment can be shaped depending on the prosthetic height needed for the tooth. There are two possible angles of 15° and 25°.

NOTE:
The connecting screw is included with the Angled Abutment in the same package.